JG-147 Metallographic Sample Mounting Press
JG-147 Metallographic Sample Mounting Press Mounting Press Metallographic Equipments Malaysia, Negeri Sembilan (NS), Seremban Supplier, Suppliers, Supply, Supplies | JNG Industry Sdn Bhd
Features and Application:
  • This machine is designed for the purpose of mounting process of those small, difficult-to-hold or irregular specimens before grinding and polishing.
  • After mounting process, it can facilitate the grinding and polishing of specimen, and also to observe material structure under metallographic microscope, or measure the hardness of the material by hardness tester.

Working Conditions:
  • The height is no more than 1000m;
  • The temperature of surrounding medium cannot be lower than -10ºC or over 40ºC;
  • The relative humidity of air should be no more than 85% (20ºC);
  • The voltage fluctuation should be no more than 15% and there should be no abvious vibration source around;
  • There should be no current conducting dust, explosive and corrosive air.

Technical Specifications:

Model JG-147A JG-147B JG-147C
Punch diameter of specimen งถ22mm งถ30mm งถ 45mm
Temperature controlling range 0 ~ 300ºC
Timing range 0 ~ 30 minutes
Consumption ≤ 800W
Power supply 220V, single phase, 50Hz
Overall dimensions 330 x 260 x 420mm
Weight 33Kg

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version