JG-9015 Salt Spray Test Chamber
Equipment Usage:
Technical Specifications:
Please compare the table carefully so that the model needs to be selected correctly
- The JG-9015 series intelligent salt spray box has highly automated and high-precision test methods. Compared with the ordinary button type salt spray box, it can not only save a lot of management time, but also minimize the test error caused by human factors. Innovative man-machine interaction management mode, accurate test temperature area setting, intelligent automatic water replenishment function, hope to get your approval.
Technical Specifications:
| Model | JG-9015-60 | JG-9015-90 | JG-9015-120 | JG-9015-160 | JG-9015-200 |
| Studio (L*W*H)cm | 60 x 45 x 40 | 90 x 60 x 50 | 120 x 80 x 50 | 160 x 90 x 60 | 200 x 100 x 60 |
| Volume of outer box | 110 x 67 x 118 | 141 x 90 120 | 175 x 115 x 125 | 230 x 125 x 145 | 280 x 135 x 145 |
| Test room volume | 108L | 270L | 480L | 864L | 1200L |
| Volume of brine box | 13L | 18L | 25L | 35L | 50L |
|
Power supply |
Single Phase AC220V 50Hz 2.0KW |
Single Phase AC220V 50Hz 2.5KW |
Single Phase AC220V 50Hz 3.5KW |
Three Phase AC380V 50Hz 5.0KW |
Three Phase AC380V50Hz 7.0KW |
| Technical parameter | Test room temperature | RT+5¡æ~50¡æ (Set according to the test standard) | |||
| Temperature fluctuation | ≤±1.0¡æ | ||||
| Salt mist settlement | 1¡«2ml/h/80cm2 | ||||
| Spray | Spray tower | The characteristic cone type disperser adjusts the size of the spray and makes the mist fogging averages. | |||
| Injector | PYREX Precision nozzle of glass | ||||
|
Spray mode |
Neutral, acid and copper accelerated salt spray test types are selected, and custom type can also be chosen, but the parameters must conform to the relevant standard requirements of salt spray test. In the program test, more test types can be defined. |
||||
|
Mist removal |
The mist is discharged by air extrusion, and the box lid is conical designed to form a top corner of 120 degrees, which is favorable for the droplet produced by salt spray not directly dropping on the sample, which ensures the accuracy of the test. |
||||
| Intelligent touch screen controller |
Test room temperature control: RT + 5 C ~50 C, precision 0.1 C (double digital display) system VT4810 PID automatic calculation. |
||||
| Liquid expansion super temperature protection controller 0~110 C (Korea) | |||||
|
Saturated barrel temperature controller: 47~70 degrees, 0~1 degrees of accuracy (even display) PID automatic calculation. |
|||||
| Time total time: 0~99999 min gap timing: 0~99999 min. | |||||
|
Pressure adjustment: a pressure regulating valve (coarse adjustment, on the back), two pressure regulating valve (fine adjustment, on the front) |
|||||
| Material Science | PVC new class A, transparent observation window | ||||
| Experimental Environment | 1. Temperature: in order to give full play to the function and performance of the laboratory, the place where the annual temperature is 5 ~35 C should be selected. | ||||
| 2. Relative humidity: no more than 85% R H.3 atmospheric pressure: 86~106kPa | |||||
| 3.There is no strong vibration around | |||||
| 4. Direct radiation without direct sunlight or other heat sources. | |||||
| 5. There is no strong air flow around it. When the ambient air needs to flow strongly, the air flow should not be blown directly into the box. | |||||
| 6. There is no strong electromagnetic field around it. | |||||
| 7. No high concentration of dust and corrosive substances around. | |||||
| Note | Special requirements for non-standard, can be customized | ||||
Please compare the table carefully so that the model needs to be selected correctly
